Swallow mixed media tag

 

Hi there! Thought I would indulge myself in a bit of messiness since I can access all my craft stuff now! I decorated an MDF tag and this is what I did. 

I began by giving it a couple of coats of gesso. 

Whilst it dried I mixed a few shakes of Mars explosion powders with some translucent distress crackle paste in a milk bottle lid (You won't need any more than this) 

I applied it with a palette knife through the tag inkables. This was set aside to dry naturally until the crackles appeared (There will be little or no crackle if you use a heat gun)

I sprayed the tag with Dylusions and metallic spray stains. I also added a few shakes of explosion powders before setting aside to dry. At this stage a few bits did flake off, so once dry I sprayed it with a spray varnish. 

On a piece of white card I stamped and coloured the swallow using versafine clair ink and ecoline pens. I then cut it out using the matching die. 

Next I stamped the mandala in versamark and embossed with gold embossing powder. I coloured it with ecoline pens and cut it out

I added the swallow and the mandala to the tag using gel medium, then added a sentiment and a ribbon.

Here's a close up of the crackle 

Here is what I used:

MDF tag

Gesso

Translucent Distress crackle paste

Pretty gets gritty explosion powders (I used Mars and Neptune)

Tag inkables

Dylusions sprays in Periwinkle blue and calypso teal

Distress spray stain in tarnished brass

Regular birds and butterflies stamps and dies

Doodle Art Mandala Set 1 stamps

Black versafine clair ink

Ecoline Pens 

Versamark ink

Gold embossing powder

Ultra thick gel medium

Spray varnish

Wordage Small Words stamp set

scraps of card for the bird, sentiment and mandala

Ribbon

If you are in Notts or Derbyshire, I am running a workshop at PDA Card and Craft, Langley Mill on Wednesday 13th July to make a mixed media tag using these stamps and inkables. If you would like to join us you can book by ringing Kayla on 01773 712266

Thanks for looking!